Descalex Powder RXSOL-15-1009-025 Kandla, Gandhidham, Mundra, Sikka, Jamnagar, Surat, Navlakhi, Porbander, Pipava, Dehej, Hazira, Okha, Vadodra, Ahmedabad, Rajkot, in India , Dubai & Singapore

0 Comments

West Indiachemicals is one of the most promising manufacturers & suppliers of Descalex Powder RXSOL-15-1009-025 Kandla, Gandhidham, Mundra, Sikka, Jamnagar, Surat, Navlakhi, Porbander, Pipava, Dehej, Hazira, Okha, Vadodra, Ahmedabad, Rajkot, in India , Dubai & Singapore.

Descalex powder scale remover and cleaner formulated to remove rust and scale deposits from boilers, diesel engine cooling water systems, condensers, evaporators, calorifiers and heat exchangers.

Alias:

651 571646, AC-2 INHIBITED POWDERED ACID,SEAWTR,AQUA

Active Matter:

93-98

Application:

powder scale remover designed for use in the chemical cleaning of evaporators, boilers, cooling towers, heat exchangers, tanks and pipes, which are commonly fouled by hard water scales, grease, tarts and other impurities.

RXSOL DESCALEX contains corrosion inhibitor which provides corrosion protection even after the cleaning, unlike other acid cleaning chemicals which may increase corrosion rate after cleaning. Moreover, it contains pH indicator which facilitate monitoring of cleaning progress.

Packing Size:

25.00 Kg.(PWD)

Using Procedure:

Directions for Use and Dose Rates
The most effective descaling is accomplished by circulation. In the case of small components, the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease and sludge, then pre-cleaning with Seaclean Plus or Enviroclean. Depending on the extent of scaling, use a solution of 2.5-10% Descalex. The solution will have a red colour which disappear when the solution is neutralised. Whenever possible, the solution should be heated to 60°C. Neutralised solutions can be reactivated by adding more Descalex until the red colour reappears. This should not be done more than twice. Descalex should not be used on aluminium, zinc, tin or galvanised surfaces. Descaling of Boilers, Descaling of Diesel Engine Cooling Water Systems, Condensers,

Evaporators, Calorifiers, Heat Exchangers:
The strength of the acid can be enhanced by adding 1 part sodium chloride (common salt) to 20 parts of Descalex. This enhancement of the cleaning solution, however, should not be used when descaling diesel engine cooling water systems. After use of Descalex a 0.5% solution of Alkalinity Control in fresh water should be used for neutralisation.

RXSOL DESCALEX improves heat transfer efficiency in heat exchangers and improve flow in pipes.
RXSOL DESCALEX effectively dissolves calcium and magnesium scale, hard water scale and variety of deposits.

Note: