Diethyl Hydroxyl Amine DEHA
RXSOL-40-5029-210Application & Usage
It is use for Water Treatment Chemical, Corrosion Inhibitor, Polymerization, Photographic Chemicals, Decolourisation, etc.
DEHA used as a volatile oxygen scavenger and reacts in a ratio of 2.8/1 DEHA/O2.
RXSOL Product DEHA
RXSOL DEHA Oxygen Scavenger 25%
DEHA-based liquid oxygen scavenger for boiler feedwater treatment, dissolved oxygen control, metal passivation and steam-condensate corrosion protection.
DEHA Oxygen Scavenger, Diethylhydroxylamine Water Treatment, Boiler Oxygen Scavenger, DEHA 25% Solution, Volatile Oxygen Scavenger, Boiler Feedwater Corrosion Inhibitor, DEHA Chemical Supplier India UAE Oman.
Procedure
Recommended Dosage
|
Parameter |
Typical Starting Guidance |
|---|---|
|
Theoretical DEHA requirement |
1.24 ppm per 1 ppm O₂ |
|
Practical active DEHA dosage |
2–3 ppm per 1 ppm O₂ |
|
DEHA residual target |
Often 0.5–1.0 ppm, program-dependent |
|
Recommended injection point |
Deaerator storage section or feedwater line |
|
Dosage control |
Dissolved oxygen and DEHA residual testing |
Application Area of DEHA :
Water Treatment , Polymerization, Photographic Chemicals, Decolourisation , Inhibitors, Silicon Rubber
Example Dosage Calculation
For boiler feedwater containing 0.1 ppm dissolved oxygen:
-
Feedwater volume: 10,000 litres
-
Dissolved oxygen: 0.1 mg/L
-
Practical starting dosage: 3 mg active DEHA per mg O₂
-
Required active DEHA: 3 grams
-
Required 25% DEHA solution: 12 grams
This is an illustrative oxygen-demand calculation, excluding any additional requirement for maintaining the specified DEHA residual.
Technical Specification
Physical Properties
| Empirical Formula | C4H11NO | |
| Molecular Wt | 89.1 | |
| DEHA 98% | DEHA 85% | |
| Sp. Gr. at 20°C | 0.855 - 0.875 | 0.895 - 0.905 |
| Refractive Index | 1.418 - 1.420 | 1.418 - 1.420 |
| Boiling Point | 124 to 126°C | 94 to 96°C |
| Freezing Point | -25 to -27°C | Below 0°C |
| Flash Point (Closed C) | Below 45°C | 45 to 47°C |
| Solubility in water | Soluble | Soluble |
| pH | 10.2 | 10 |
Specification :
| Specification | DEHA 98% | DEHA 85% |
| Purity as DEHA (wt. %) | 98.00 min. | 85.00 min. |
| Water Content (% by wt.) | -- | 15.00 max |
| Ethylamines (% by wt.) | 0.5 max. | 0.05 max. |
Typical Technical Specifications
|
Parameter |
Typical Value |
|---|---|
|
Appearance |
Clear, colourless to pale yellow liquid |
|
Chemical Name |
N,N-Diethylhydroxylamine |
|
CAS Number |
3710-84-7 |
|
Molecular Formula |
C₄H₁₁NO |
|
Active Concentration |
85% DEHA or formulated aqueous solutions |
|
Molecular Weight |
89.14 g/mol |
|
Solubility |
Miscible with water |
|
Function |
Oxygen scavenging and corrosion control |
|
Application |
Boiler feedwater and steam-condensate systems |
These specifications are indicative. Commercial DEHA oxygen scavengers are available at different active concentrations, including diluted boiler-treatment formulations.
Notes
One important formulation question: Are you planning to manufacture DEHA 25% solution, DEHA 85%
HOW TO MANUFACTURE 25% DEHA SOLUTION?
Manufacturing Formulation – DEHA 25% Solution
For manufacturing a 100 kg batch of a simple aqueous DEHA oxygen scavenger:
|
Raw Material |
Quantity |
|---|---|
|
DEHA 85% |
29.41 kg |
|
Demineralized Water |
70.59 kg |
|
Total |
100.00 kg |
Manufacturing Procedure
-
Charge approximately 60 kg demineralized water into a clean, compatible mixing vessel.
-
Start gentle agitation.
-
Slowly add 29.41 kg of DEHA 85% under controlled conditions.
-
Add the remaining demineralized water to reach 100 kg total.
-
Mix until the solution is homogeneous.
-
Verify DEHA concentration using a validated analytical method.
-
Pack in compatible, tightly sealed containers.
Use suitable ventilation, protective equipment and temperature control. Confirm the current DEHA SDS before manufacturing.
This is an uncatalyzed 25% active DEHA solution, not a validated proprietary boiler-treatment formulation.
Similarly follow the above step for 50% and 85% DEHA.
Storage :
Can be stored and handled in equipment made of stainless steel of Type SS304 or SS316 or steel lined with glass, polypropylene or polyethylene. Storage in mild steel equipment or containers is not recommended. DEHA drums should be stored in a cool and well ventillated area, away from sources of ignition.
Packing :
25 Ltrs, 210 Ltrs. in new UN approved HMHDPE drums / In ISO Tanks of 20 Mt's capacity.
Health & Safety :
DEHA is irritating to skin,eyes and the mucous membrane. In case of contact,affected area to be washed with plenty of water for atleast 15 minutes. In case of inhalation,victim should be moved to fresh air and oxygen should be administered. In case of ingestion,victim should be made to consume copious quantity of milk and water. Medical advice should be sought at once. Personal protective equipment should always be used while handling.
Need pricing or a bulk quote?
Send us the product and quantity — our team replies with a quote same day.