RXSOL 666 HD

RXSOL 666 Surface Cleaner : Super Power and awarded cleaner. its small concentration can play magic role to clean Heavy Aromatic , hydrocarbon solvent and, natural Latex , palm oil, Veg oil and many others cargo.  Surfactant base highly concentrate Product specially designed to clean Tank Container , Cargo Tank. RXSOL 666 due to strong concentration provides a quick penetration and power. RXSOL-37-0666-210
 

Special Features and Advantages

• Powerful Hydrocarbon Removal: Helps remove heavy fuel oil, grease, petroleum sludge and oily residues.

• Rapid Penetration: Penetrates stubborn deposits and assists in loosening strongly adhering contamination.

• Effective Emulsification: Disperses loosened oil and grease to facilitate their removal during washing.

• Heavy-Duty Cleaning: Suitable for tank containers, cargo tanks, pipelines and industrial surfaces.

• Concentrated Formula: Can be diluted for routine cleaning or used neat for localized heavy contamination.

• Versatile Application: Suitable for spray washing, soaking, circulation and tank-cleaning operations.

• Warm-Water Performance: Warm-water cleaning can improve removal of viscous oily deposits.

• Reduced Cleaning Downtime: Can help reduce manual scrubbing and repeated washing cycles.

• Easy Rinsing: Designed to assist in removing loosened contamination with subsequent flushing.

RXSOL 666 is covering 10-12 squire meter are when spraying directly. It is advised to use a solution of 2-5% wash water mixed in the tank to be cleaned. Dose rates and results will vary depending on contamination, the temperature of the cleaning solution, and number of tanks to be cleaned with the solution.

Spot  cleaning

RXSOL 666 can be sprayed neat onto tank surfaces to be cleaned. The contact time should be at least 30 minutes. Bulkheads/walls can be washed down by use of tank washing machines or high pressure cleaning machines. The best result is achieved with warm water. Slops should be constantly stripped from the tank and transferred to a holding tank or pumped ashore to slop tanks.

Rock and Roll method (Cargo Tank)

1.    Cleaning of double bottom tanks during voyages.
2.    Flush tank with sea water, stripping constantly.
3.    After flushing, ensure all suction and discharge valves in the engine room are closed.
4.    Dose tank with Rxsol 666 through the sounding pipe or manhole between 0.5 - 1 litre per ton of water, for   75-80% of capacity of tank to be cleaned.
5.    Fill tank to 25% capacity with sea water, raise the temperature up to 60°C and maintain this for 24 hours.
6.    Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely.

Pipeline Cleaning

1. Isolate Pipelines: Check blockage, pipeline material, and pressure limits.
2. Remove Bulk Sludge: Use pigging, vacuum removal, or sectional cleaning where feasible.
3. Compatibility Test: Test RXSOL 666 HD on actual HFO sludge.
4. Pilot Trial: Determine dosage, contact time, and circulation conditions on a small section.
5. Chemical Circulation: Circulate through a closed-loop system with pressure monitoring.
6. Recover & Flush: Collect spent cleaner and sludge, flush with a compatible medium, and verify flow restoration before recommissioning.
   
    

Typical Procedure

Recommended Dosage and Cleaning Procedure

Technical Specifications

Values reproduced from published RXSOL product specifications. Confirm against the current batch COA and SDS, particularly flash point, flammability and compatibility, before issuing a controlled TDS.

Properties

Appearance : Clear to Pale Yellow Liquid

Odour : Charastic

Sp. Gravity 20°C : 1.0 to 1.05

Boiling point >100 °C at 760 mm /Hg

Vapour pressure - not known

Vapour density - not known

Freezing point 0 °C at 760 mm/Hg

Completely soluble in water

 Non combustible