Carbon Remover

Solvent based Heavy-duty carbon cleaning  chemical helps to dissolves carbon, resin, and varnish deposits quickly. RXSOL Carbon Remover breaks quickly combustion products from fuel heater, oil bath, highly soiled components. blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder etc.
For removal of carbon deposits it must be used concentrated ,contained in a steel immersion bath.

SAFETY AND HANDLING:- Completely  Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running  water for 15- minutes and seek medical attention.

carbon remover can be diluted with water to make it economical

Depending upon the deposition either concentrated or diluted .If used diluted use 1 part concentrate to 2-10 parts of water to yield a very effective end product. The components and machine parts are then dipped into the solvent / solution for 30 min. to 1 hr. Heavy deposition may need 12-24 hours , parts must be taken out from the bath and washed thoroughly with a high- pressure water supply jet system.

concentrated RXSOL-16-1003-025 is most effective product in its category due to its quick and complete action.  can be applied for cleaning of highly soiled components. blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder heads, injectors, tubes, oil filters , old paint and lacquers ) 

 

It contains Sodium Tolyltriazole ( CAS No- 64665-57-2 ) which is mainly used as antirust and corrosion inhibitor for metals (such as silver, copper, zinc, lead, nickel, etc..), and for antirust oil (tallow) products, the gas phase corrosion inhibitor of copper and copper alloy, lubricant additive, cycle water treating compound and auto antifreeze. It also can be used with manifold sterilization algaecide and has a very fine corrosion mitigation effect on close cycle cooling water system.